Mobil Jet™ Oil II was the first standard Type II oil on the market. After more than half a century, it continues to be the preferred oil of choice and is used in more than 50 percent of aircrafts in operation today.
This legendary, hassle-free, second-generation oil helps keep engines clean and operating at peak efficiency. Laboratory tests and engine inspections confirm it can handle extreme speeds, temperatures (up to 204 degrees Celsius/400 F) and stresses without breaking down.
Mobil Jet Oil II is formulated to meet the demanding requirements of aircraft-type gas turbines operating over a wide range of severe operating conditions. The product has a high specific heat in order to ensure good heat transfer from oil-cooled engine parts. In extensive laboratory testing and in-flight performance, Mobil Jet Oil II exhibits excellent bulk oil stability at temperatures up to 204ºC (400 ºF). The evaporation rate at these temperatures is low enough to prevent excessive loss of volume.
| Features | Advantages and Potential Benefits |
| Excellent thermal and oxidation stability |
Reduces the formation of carbon and sludge deposits
|
|
Excellent wear and corrosion protection |
Reduces engine maintenance Extends gear and bearing life |
| Retains viscosity and film strength across wide temperature range | Provides effective lubrication at high operating temperatures |
| Chemically stable | Reduces evaporation losses and lowers oil consumption |
| Low pour point | Eases start-up in low ambient temperature conditions |
Mobil Jet Oil II is recommended for aircraft gas turbine engines of the turbo-jet, turbo-fan, turbo-prop, and turbo-shaft (helicopter) types in commercial and military service. It is also recommended for aircraft-type gas turbine engines used in industrial or marine applications. Mobil Jet Oil II is approved against the Standard Performance (STD) classification of U.S. Military Specification MIL-PRF-23699. It is also compatible with other synthetic gas turbine lubricants meeting MIL-PRF-23699. However, mixing with other products is not recommended because the blend would result in some loss of the performance characteristics of Mobil Jet Oil II. Mobil Jet Oil II is compatible with all metals used in gas turbine construction, as well as with F Rubber (Viton A), H Rubber (Buna N), and silicone seal materials.
Moove Lubricants is an Authorised ExxonMobil Aviation Lubricants distributor in Europe. Moove operates extensively throughout South America, Europe and Asia; representing Mobil products in the automotive, industrial, marine and aviation sectors.
Request a Quote here.
